Index-3
Low Voltage Directive, 2-37
M
Masks & Owners Group, 2-92
Max Speed, 2-145
Maximum frequency, 2-146
MOP Mask, 2-92
MOP Owner, 2-104
Motor Cable Lengths, 2-31
Motor Nameplate, 2-96
Motor NP FLA, 2-96
Motor NP Hz, 2-96
Motor NP Power, 2-96
Motor NP Pwr Units, 2-96
Motor NP RPM, 2-96
Motor NP Volts, 2-96
Motor OL Factor, 2-98
Motor OL Hz, 2-97
Motor Overload, 2-97
Motor Start/Stop, 2-100
Mounting Dimensions, 1-5
O
Output Current, 2-101
Output Devices
Output Reactor, 2-101
Output Frequency, 2-102
Output Reactor, 2-101
Output Voltage, 2-102
Overspeed, 2-103
Owners, 2-104
P
Parameter access level, 2-106
Parameters
Accel Mask, 2-92
Accel Owner, 2-104
Alarm x Code, 2-5
Analog In1 Value, 2-15
Analog In2 Value, 2-15
Analog Out1 Sel, 2-18
Anlg In Config, 2-3
Anlg In Loss, 2-4
Auto Rstrt Delay, 2-24
Auto Rstrt Tries, 2-24
Clear Fault Owner, 2-104
Current Lmt Sel, 2-134
Decel Mask, 2-92
Decel Owner, 2-104
Dig Out1 Level, 2-64
Dig Out1 OffTime, 2-66
Dig Out1 OnTime, 2-66
Dig Out2 Level, 2-64
Dig Out2 OffTime, 2-66
Dig Out2 OnTime, 2-66
Digital In1 Sel, 2-47
Digital In2 Sel, 2-47
Digital In3 Sel, 2-47
Digital In4 Sel, 2-47
Digital In5 Sel, 2-47
Digital In6 Sel, 2-47
Digital Out1 Sel, 2-4, 2-63
Digital Out2 Sel, 2-4, 2-63
Direction Mask, 2-92
Direction Owner, 2-104
Fault Clr Mask, 2-92
Fault Config x, 2-134
Flying Start En, 2-81
Flying Start Gain, 2-81
Flying StartGain, 2-81
Jog Mask, 2-92
Jog Owner, 2-104
Local Mask, 2-92
Local Owner, 2-104
Logic Mask, 2-92
MOP Mask, 2-92
MOP Owner, 2-104
Power Loss Mode, 2-109
Reference Mask, 2-92
Reference Owner, 2-104
Speed Mode, 2-139
Speed Ref A Sel, 2-3
Start Mask, 2-92
Start Owner, 2-104
Stop Owner, 2-104
Testpoint 1 Sel, 2-161
Testpoint x Data, 2-161
Password, HIM, 2-88
PE, 2-87
PE Ground, 2-87
PET Ref Wave, 2-106
PI Config, 2-116
PI Control, 2-116
PI Error Meter, 2-116
PI Feedback Meter, 2-116
PI Feedback Sel, 2-116
PI Integral Time, 2-116
PI Output Meter, 2-116
To Next Page
Loading...
Need help?
General
