Publication 1757-RM810A-EN-P - May 2002
Physical Equipment Blocks 2-3
Redundancy Module (RM)
Description Identifies the Primary and Secondary Redundancy Modules connected by a dedicated redundancy cable in a
Redundant Chassis Pair (RCP). It associates the Primary RM with its “partner” Secondary RM block.
This block always runs at an execution period of 2 seconds. It is redundancy compliant.
Function • Provides parameters describing the status and configuration of the RM.
• Handles notification reporting.
• Serves as a faceplate for any parameters whose scope corresponds to that of the RM as a whole.
Inputs Integrated Control Protocol (ICP) communications
Redundancy communications through the redundancy cable.
Outputs See above.
Parameters ALMENBSTATE
AREVISION
AUTOSYNCCMD
AUTOSYNCOPT
AUTOSYNCSTAT
AVERSION
BECMPRICMD
BREVISION
BVERSION
CHANINUSE [0..31]
CJDISABLE
CLKADJUST
CLKTIME
CLKZONE
CONFIGURED
DISPPOS
DISQSECCMD
DRIVERNAME
ENTERSBYCMD
ERRFL
ERRORCODE
ERRORMSGIDX
EUDESC
GENSTATE
GENSTATEA
HIALM
INTISWCMD
IPADDRESS
KEYWORD
LASTSYNCABRT
LASTSYNCARES
MAJRECFAULT
MAJURECFAULT
MINRECFAULT
MINURECFAULT
MODCOMPATA
MODTYPEA
MULREDUNSTAT
NETWORKTYPE
NUMSLOTS
PREVISION
PRODCODE
PRODTYPE
PRODTYPEA
PROGCMD
PROGCMDRECOG
QUALPROGA
READINESS
READINESSA
RECOVMSGIDX
REDUNSTATE
REDUNSTATEA
REFRESHMS
SCANAREA
SCANASSOCDSP
SCANCTRLLVL
SCANEUHI
SCANEULO
SCANGRPDTL
SCANPNTDTL
SECMODNAME
SECNAMESTRING
SECTMPNAME
SERIALNUM
SLOTNUMBER
STDTIME
SWAPCTRLCMD
SWAPPOSCMD
SWAPSBYCMD
SYNCSECCMD
ULCNBMAC
VENDORID
WCTCLKTIME
Spare Allen-Bradley Parts
To Next Page
Loading...
Need help?
General
