ALLIANCE 030 Series User Manual

© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
Operating Instructions
77
70458301ENR6
Error Codes
Display Definition Corrective Action
OP
Open thermistor error
 Check thermistor. Replace if inoperative.
 Check wiring diagram between control and
thermistor. Refer to wiring diagram for proper
wiring.
 Check control. Replace if inoperative.
SH
Shorted thermistor error
 Check thermistor. Replace if inoperative.
 Check wiring between control and thermistor. Refer
to wiring diagram for proper wiring.
 Check control. Replace if inoperative.
AF - 1
Airflow switch closed when cycle
started
 Check airflow switch. Replace if inoperative.
AF - 2
Airflow switch failed to close after cycle
started
 Check airflow switch. Replace if inoperative.
AF (Flashing)
Bouncing Airflow Switch
 Check airflow switch to ensure that it is properly
aligned and securely mounted in the mounting
bracket.
 Make sure airflow switch can open and close freely.
 Check installation and make sure there is adequate
airflow.
 Make sure exhaust is not blocked.
 Clean the lint screen.
 Replace airflow switch if inoperative.
AF (Solid)
Airflow Switch Closed when Resuming
Cycle
 Allow up to 20 seconds for this condition to clear.
 Check if airflow switch opens at end of cycle.
 Replace airflow switch if inoperative.

ALLIANCE 030 Series Specifications

General

Brand	ALLIANCE
Model	030 Series
Category	Dryer
Language	English