70457901ENR7
88
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
Daily
1. Inspect the area surrounding tumble dryers,
remove all combustible materials, including lint,
before operating the machines.
2. Check cylinder for foreign objects to avoid
damage to clothing and equipment.
3. Clean lint from lint compartment and screen to
maintain proper airflow and avoid overheating.
a. Open the lint panel.
b. Remove all accumulated lint in the lint
compartment area. Lightly brush any lint that
may be left on the lint screen.
c. Be sure the lint screen is not torn.
d. The lint screen is designed to completely
cover the entire opening in the lint screen
panel. Be sure that it does so.
e. Wipe lint off of the cabinet high limit
thermostat and thermistor. Refer to Figure 60.
f. Replace the lint compartment panel on the
tumble dryer ensuring a tight fit, and lock if
applicable.
4. At end of day, clean the machine's top, front and
side panels with mild detergent. Rinse with clean
water. DO NOT use products that contain alcohol
on the control panel.
Figure 60
To reduce the risk of serious injury, do not
open the lint panel while the tumble dryer is
in operation. Before cleaning the lint
screen, open tumble dryer door and allow
cylinder to completely stop.
W410R1
WARNING
TMB2281N
1 Thermistor
2 Thermostat
3 Lint Screen
To Next Page
Loading...
Need help?
General