Repairs
4 - 18
Motor Shaft Removal and Disassembly
Removal and disassembly of the motor shaft assembly can
be accomplished while the winch is mounted on the tractor.
The motor and brake can be removed without removing
any other components (other than various hoses and fi t-
tings), but taking out the planetary reducer and reducer
housing requires removing the Freespool Shifter Fork and
Intermediate Shaft and Gear fi rst (see Intermediate &
FREESPOOL Shaft Removal section). Inspect all parts
for damage and wear as specifi ed in Figure 4-8.
20
17
16
14
9
21
6
5
4
12
10
11
3
29
8
32
26
30
2
15
1
15
23
34
24
22
15
33
19
1. Motor
2. Manifold Bracket
3. Planetary Reducer
4. Spacer
5. Gear Retainer
6. Capscrew
8. Capscrew
9. Reducer Mounting
10. Seal Ring
11. O-ring
12. O-Ring
14. Flangescrew
15. Washer
16. Motor Shaft Mounting Plate
17. Flangescrew
19. Capscrew
20. O-Ring
21. O-Ring
22. Bracket
23. Capscrew
24. Nut
26. Washer
29. Brake
30. Stud
32. Nut
33. Nut
34. Capscrew
Figure 4-5 Motor Shaft Components
- Motor Shaft Removal & Disassembly
To Next Page
Loading...