Each Freeman Baler is identifi ed by means of a baler model number and baler serial number. As a further identifi ca-
tion, all power units are provided with a serial number. The serial number is an important piece of information about
the machine and it may be necessary to know it before obtaining the correct replacement part. The serial number
is located on the top chamber rail on the rear left-hand side, above the tool box. To ensure prompt, effi cient service
when ordering parts or requesting repairs from your authorized Freeman dealer, record the serial numbers in the
spaces provided.
Baler Serial Number
Rear, left side of baler on upper frame.
Power Unit Serial Number
Deutz Diesel - forward side of engine on block.
Driveline P.T.O. 540 RPM - top of gearbox.
NOTE: Reference to left-hand and right-hand used throughout the manual are understood to mean from a posi-
tion facing in the direction of travel.
Side Feed Baler Serial Number Format
As Of 2011
3 8 5E16-12 3
Drive Type
E - Engine
H - Hydro
D - Driveline
S - Self Propelled
Plunger Size
14”, 15”, 16”
Sequential
Number
Twines/Bale
2 - 2-Tie
3 - 3-Tie
Knotter
0 - Conventional
5 - Tailless
Model
7 - Base
8 - Premium
Dash - Bullgears
G - Gearbox
Serial Number Location
9
89-096Rev: 11-2016
To Next Page
Loading...
Need help?
General