Allied Telesis AT-9000/28SP Command Line User's Guide

Chapter 79: Non-secure HTTP Web Browser Server Commands
1156 Section XI: Management Security
HTTP SERVER
Syntax
http server
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to activate the HTTP web browser server on the
switch. The switch supports non-secure HTTP web browser management
sessions when the server is activated.
Confirmation Command
“SHOW IP HTTP” on page 1159.
Example
awplus> enable
awplus# configure terminal
awplus(config)# http server

Allied Telesis AT-9000/28SP Specifications

General

Number of Ports	28
Port Type	Gigabit Ethernet
Ports	24 x 10/100/1000Base-T, 4 x SFP
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Power over Ethernet (PoE)	No
Rack Mountable	Yes
Product Type	Switch
Layer	3
MAC Address Table Size	16K
VLANs	4K
Jumbo Frames	9K
Dimensions (W x D x H)	440 x 240 x 44 mm
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)