Name: Allied Telesis AT-9000/28SP
Brand: Allied Telesis
Rating: 4 (1 reviews)

To Next Page

To Previous Page

AT-9000 Switch Command Line User’s Guide

Section VIII: Port Security 769

DOT1X PORT-CONTROL FORCE-UNAUTHORIZED

Syntax

dot1x port-control force-unauthorized

Parameters

None.

Mode

Port Interface mode

Description

Use this command to configure the ports to the 802.1x authenticator role,

in the unauthorized state. Although the ports are in the authenticator role,

the switch blocks all authentication on the ports, which means that no

clients can log on and forward packets through them. For background

information, refer to “Operational Settings” on page 721.

Confirmation Command

“SHOW AUTH-MAC INTERFACE” on page 777 or “SHOW DOT1X

INTERFACE” on page 782

Example

This example sets ports 7 and 24 to the authenticator role, in the force-

unauthorized state:

awplus> enable

awplus# configure terminal

awplus(config)# interface port1.0.7,port1.0.24

awplus(config-if)# dot1x port-control force-unauthorized

Other manuals for Allied Telesis AT-9000/28SP

Questions and Answers:

Need help?

Do you have a question about the Allied Telesis AT-9000/28SP and is the answer not in the manual?

General