24 x900 Series Switch and SwitchBlade
®
x908
C613-03092-00 REV J
Expansion Options
Optional expansion modules make the AT-9924Ts, x900-12XT/S, x900-24XT,
x900-24XT-N, x900-24XS, and SwitchBlade x908 switches some of the most
flexible units available. They provide economical combinations of speed and
port density.
The AT-9924Ts supports the following expansion modules:
■ AT-A60, 1 x 10 GbE XFP port
■ AT-A61, 12 x SFP ports
■ AT-A62, 12 x RJ-45 ports
The x900-12XT/S, x900-24XT, x900-24XT-N, x900-24XS, and SwitchBlade x908
switches support:
■ XEM-1XP, 1 x 10 GbE XFP port
■ XEM-2XP, 2 x 10GbE XFP ports (when running the AlliedWare Plus
operating system)
■ XEM-12S, 12 x SFP ports
■ XEM-12T, 12 x RJ-45 ports
■ XEM-STK, 2 stacking ports (when running the AlliedWare Plus operating
system)
For more information about AT-A6x expansion modules, see the AT-9900s
Series Switch Expansion Module Installation Guide.
For more information about XEM expansion modules, see the x900 Series
Switch and SwitchBlade
®
x908 Expansion Module Installation Guide.
For the latest list of approved transceiver modules, contact your authorised
Allied Telesis distributor or reseller.
To Next Page
Loading...
