Chapter 2: Installation
40
Installing the Switch on a Desktop or Table
You may install the switches on a desktop or table, or in a standard 19-
inch equipment rack. To install the switch in a rack, see “Installing the
Switch in an Equipment Rack” on page 41.
To place the switch on a desktop or table, perform the following
procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Place the switch on a flat, secure surface (such as a desk or table)
leaving ample space around the unit for ventilation.
3. Go to “Installing SFP Transceivers” on page 43 or “Cabling the Switch”
on page 46.
To Next Page
Loading...
Need help?
General
