Allied Telesis AT-GS900M Series Installation Guide

Chapter 2: Installation
42
3. Mount the switch in a standard 19-inch equipment rack using four
equipment rack screws (not provided with the switch). See Figure 11.
Figure 11. Mounting the Switch in an Equipment Rack
4. Go to “Installing SFP Transceivers” on page 43 or skip to “Cabling the
Switch” on page 46 if not installing SFP transceivers.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English