Allied Telesis AT-GS950/24 - Chapter 2: Basic Switch Configuration

25
Chapter 2
Basic Switch Configuration
This chapter provides procedures to configuring basic system parameters
for the AT-GS950/24 switch and contains information for the following
sections:
 “Configuration of IP Address, Subnet Mask and Gateway Address” on
page 26
 “IP Access List Configuration” on page 28
 “System Time” on page 31
 “DHCP and ATI Web Discovery Tool” on page 34
 “DHCP Client Configuration” on page 35
 “DHCP Auto Configuration” on page 37
 “System Management Information” on page 38
 “User Name and Password Configuration” on page 40
 “User Interface Configuration” on page 43
 “System Information Display” on page 45
 “Switch Reboot” on page 47
 “Pinging a Remote System” on page 54
 “SSL Settings” on page 56
 “System Log Configuration” on page 58
Note
To permanently save your new settings or any changes to the
configuration file, select Save Configuration to Flash from the main
menu on the left side of the page.