Chapter 24: Management Software Updates
314
2. From the Firmware Upgrade folder, select via HTTP.
The Firmware Upgrade via HTTP Page is displayed. See Figure 110.
Figure 110. Firmware Upgrade via HTTP Page
3. Change the following parameter as necessary:
Firmware File - Enter the path and the firmware file name or click
the Browse button and select the file name.
4. To begin the upgrade process on the switch, click Apply.
The software begins to download onto the switch immediately. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.
To Next Page
Loading...
