AT-GS950/24 Web Interface User Guide
255
Figure 91. Dial-In User Page
3. In the User Name field, type a name for the user.
4. In the Password field, type a password for the user.
5. In the Dynamic VLAN field, enter the VID of the VLAN which you will
allow the user to access. If you enter 0, this field will be ignored.
6. Click Add.
7. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.
Modify a Dial-in User
To modify the settings for a dial-in user, perform the following procedure:
1. From the main menu on the left side of the page, select the Security
folder.
The Security folder expands.
2. From the Security folder, Dial-in User.
The Dial-in User page is displayed. See Figure 91.
3. In the list of dial-in users, highlight the user you want to modify.
The user’s information is displayed in fields above.
4. In the User Name or Password fields, enter the revised user
information.
5. In the Dynamic VLAN field, revise the VID of the VLAN which you will
allow the user to access.
6. Click Apply.
7. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.
To Next Page
Loading...
Need help?
General
