AT-GS950/24 Web Interface User Guide
73
Disable Port Mirroring
To disable Port Mirroring, perform the following procedure:
1. Select the Bridge folder.
The Bridge folder expands.
2. From the Bridge folder, select Mirroring.
The Mirroring page is shown in Figure 23 on page 71.
3. From the Status field, select Disable and click Apply.
Port mirroring is immediately disabled on the switch and the
parameters on the web page become inactive. You can now use the
mirroring port for regular network operations.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
To Next Page
Loading...
