11-7-2 SAMBA
SAMBA Service functionality is enabled by default, only the setup of an user account is required to use the service.
(1) User Account Setup
User name：User name of the account for both FTP and SAMBA Services.
Password：Password of the account for both FTP and SAMBA Services. Must contain at least 5
characters.
Access Policy：
read only：Users can only read from the storage device.
read-write：Users can add, read, or delete the files stored in the device.
Enabled：Check this box to enable the rule.
(2) Guest Account Setup
Guest Access is for providing guests (username: Guest) access to the files within the USB Storage without
requiring a password. The default setting for this function is disabled. There are only two permissions for this
function.
To Next Page
Loading...
Need help?
General
