ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
If this option is selected, the System Log feature will be enabled.
The device provides external system log servers with log collection feature.
System log is an industrial standard communications protocol. It is designed
to dynamically capture related system message from the network. The
system log provides the source and the destination IP addresses during the
connection, service number, and type. To apply this feature, enter the
system log server name or the IP address into the empty "system log server"
field.
Log Setting
Alert Log
The device provides the following warning message. Click to activate these features: Syn Flooding, IP
Spoofing, Win Nuke, Ping of Death / Unauthorized Login Attempt.
Bulky syn packet transmission in a short time causes the overload of the system
storage of record in connection information.
Through the packet sniffing, hackers intercept data transmitted on the network.
After they access the information, the IP address from the sender is changed so
that they can access the resource in the source system.
Servers are attacked or trapped by the Trojan program.
The system fails because the sent data exceeds the maximum packet that can
be handled by the IP protocol.
If intruders into the device are identified, the message will be sent to the system
log.