Allnet ALL-VPN10 User Manual

ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
62
This function will greatly improve the data transfer rate between WMM-enabled
wireless devices.
WMM AP Parameter Setting
Tx Power
The default value is 100%. To narrow down covering range, users can input a
smaller value.
Channel Bandwidth
20- the router will use 20Mhz for data transmission and receiving between the AP
and the stations.
20/40 – the router will use 20Mhz or 40Mhz for data transmission and receiving
according to the station capability.
SSID Summary
The status of every SSID will be shown here. Click “Edit” to enter configuration
page.

Allnet ALL-VPN10 Specifications

General

Brand	Allnet
Model	ALL-VPN10
Category	Network Router
Language	English