Do you have a question about the Allnet ALL0236 and is the answer not in the manual?
Wireless Speed | Up to 300Mbps |
---|---|
Maximum Data Rate | 300Mbps |
Security | WEP, WPA, WPA2 |
Frequency Band | 2.4 GHz |
WAN Ports | 1 |
LAN Ports | 4 |
Wireless Standards | 802.11b/g/n |
Antennas | 2 |
Provides an overview of the Wireless-N Broadband Router's features and capabilities.
Details how the router handles internet access, including shared access and modem support.
Lists and describes advanced features for internet connectivity, like ALGs and Port Forwarding.
Describes the wireless capabilities, standards, and speeds supported by the router.
Outlines the security aspects, including password protection, WPA, WEP, and firewall.
Lists the necessary hardware and software requirements before installation.
Outlines the initial steps for physically installing the router.
Explains how to connect to and use the router's web-based configuration interface.
Covers configuration of the router's Local Area Network IP address, subnet mask, and DHCP server.
Explains how the DHCP server assigns IP addresses to network devices.
Allows choosing between Router and Access Point modes for the device.
Configures the router's wireless network parameters like SSID, channel, and security.
Explains the different wireless security options like WEP, WPA-PSK, and WPA2-PSK.
Provides detailed steps for configuring WEP data encryption.
Details the configuration for WPA-PSK wireless security.
Covers advanced wireless security protocols WPA2-PSK and WPA-802.1x.
Guides on setting a password to secure the router's configuration data.
Details how to configure Windows PCs to connect to the router and internet.
Provides instructions for configuring internet access for Windows 2000, XP, and Vista.
Step-by-step guide for setting up wireless connections on Windows XP.
Specific instructions for setting up WEP encryption for wireless connections in Windows XP.
Specific instructions for setting up WPA-PSK encryption for wireless connections in Windows XP.
Describes settings for DMZ and URL filtering.
Guides on setting up Dynamic DNS for easier remote access.
Explains how to set up port triggering for specific applications.
Allows making specific LAN servers accessible from the internet.
Allows making LAN servers accessible from the internet using a range of ports.
Configures traffic prioritization for network performance.
Allows backup, restore, or reset of router configuration files.
Sets up email notifications for logs and security alerts.
Enables and configures remote management access over the internet.
Outlines the steps to update the router's firmware using a web browser.
Allows switching the device mode back to Router mode if desired.
Addresses issues like failure to connect to the router.
Solves problems related to internet access, such as timeouts.
Addresses common wireless issues like finding the AP or slow connection speeds.