Allworx Phone Model 9224 User Guide
+1 866 ALLWORX * +1 585 421 3850 Page 35
www.allworx.com
Version: L Revised: October 11, 2018
To update the Audio Message Center settings:
The Audio Message Center settings enable updating the presence setting, name recording, manage
the greetings or updating the Allworx PIN.
1. Log in to the Audio Message Center and press 4 on the numeric keypad.
Key
During
message
After
message
Option
*1 1 Reply to this message - internal recipients only.
• Enter an extension to forward the message. The Allworx system plays the selected
user’s number and name. Select one of the options:
• Record a message, and then press the # key when complete. Select one of the
following options:
*2 2 Forward this message - internal recipients only. Follow the steps for Reply to this
message.
*3 3 Delete the message.
*4 4 Replay this message.
*6 6 Play the next message.
*9 9 Place a call to the sender of this message.
*# # Return to the previous menu.
** * Listen to these choices again.
Send Voicemails directly to users without accessing the Audio Message Center. Dial 3
*
+ extension -
digits may vary per system. Please check phone functions tab of the My Allworx Manager page or consult
with the Allworx administrator.
Digits may vary per system. Please check phone functions tab of the My Allworx Manager page or consult
the Allworx administrator.
• <extension number> Enter another user’s extension for the voicemail message.
• 9 To send the message to all Allworx users on the system - if
enabled (Digits may vary per system. Please check phone
functions tab of the My Allworx Manager page or consult
the Allworx administrator.).
Key Option Key Option
1 or hang up Send the message # Cancel the message
2 Review the message * Hear these options again
3 Change the message
To Next Page
Loading...
