Allworx 9224 - Page 48

Allworx Phone Model 9224 User Guide
Page 38 +1 866 ALLWORX * +1 585 421 3850
www.allworx.com
Version: L Revised: October 11, 2018
2. Select one of the following options.
Key Option
1 To manage the Auto Attendant
• Enter the Auto Attendant number (The number of Auto Attendants supported: 6x 12 and Connect 300
series - 9; 6x and Connect 500 series - 16, 48x and Connect 731 - 32). Example 1 = Auto Attendant 1
and 32 = Auto Attendant 4332.
• Select the recording type:
1
(con’t)
• Select an option and follow the prompts:
2 To manage the Call Queue - Follow the steps in To manage the Auto Attendant, except enter the Call
Queue number (0 through 9) to change.
0 For <alternate language>*
# To return to the previous menu
* To listen to these choices again
* Changes the language heard for the prompts. Follow the prompts to continue changing the Allworx system
recordings.
Key Option
1 To manage the <Auto Attendant> greeting.*
2 To manage the <Auto Attendant> status message.
3 To manage the <Auto Attendant> schedule
A message plays: “The Auto Attendant is using schedule <number>. To select a different
schedule, enter the schedule number followed by #.”
Enter the schedule number, and then enter the # sign. After successfully selecting a different
schedule, the user hears, “The Auto Attendant has been changed to use schedule <number>.”
The Message Center returns to the Manage Auto Attendant Menu.
If selecting a different schedule is unsuccessful, the user hears, “You must enter a valid schedule
number.” The Message Center returns to the Manage Auto Attendant Schedule Menu.
# Return to previous menu
* Listen to these choices again
* Enter the greeting number to manage after selecting the option.
Key Option
1 Save the new system recording
2 Change the custom message
3 Review the message
4 Delete the message
# To return to the previous menu for all custom recordings except Call Queue status messages. Fo
Call Queue status messages, press # to cancel changing the message.
* To listen to these choices again