Alpha 6000S series - Chapter 2 Installation and Wiring; External and Installation Dimensions; Mounting Location Requirements

Chapter 1 Purchase Inspection
7
1.3 Nameplate of Inverter
On the right side of the bottom plate of inverter, there is a nameplate, which marks the model and rated value of
inverter. See the following Figure:
Inverter model
Adaptive motor model
Rated input voltage, current,
frequency
Rated output voltage, current,
frequency
Barcode information
Production date
ALPHA6000S Series Nameplate of Inverter
Notes: Nameplates of ALPHA6000S series inverters are similar with those of ALPHA6000V series inverters.
After unpacking, check whether the nameplate of the drive is consistent with the demand, if it is inconsistent,
contact the dealer or the supplier.