u button
LINK CUE button
SEND button
(DUB ECHO)
CH2 CUE A button
Others: Standby checking mode
It is a mode checking a standby state.
The unit enters standby mode 1 minutes after standby checking mode starts.
[Functional overview]
While holding the LINK CUE, CH2 CUE A and SEND (DUB ECHO) buttons pressed, press the u button to turn the unit on.
Check the unit goes into standby state after 1 minute.
Only MIDI START/STOP (WAKE UP) button LED lights on in standby state.
Pressing MIDI START/STOP (WAKE UP) button will cancel standby state.
[Operation]
To Next Page
Loading...