Technical Specifications
Protective fuse rating
The recommended maximum rating of the external protective fuse for this
equipment is 16A, Red Spot type or equivalent, unless otherwise stated in the
technical data section of the product documentation.
Insulation class: IEC 61010-1: 1990/A2: 1995 This equipment requires a
Class I protective (safety) earth
EN 61010-1: 1993/A2: 1995 connection to ensure user
Class I safety.
Installation IEC 61010-1: 1990/A2: 1995 Distribution level, fixed
Category Category III installation. Equipment in
(Overvoltage): EN 61010-1: 1993/A2: 1995 this category is qualification
Category III tested at 5kV peak,
1.2/50µs, 500Ω, 0.5J,
between all supply circuits
and earth and also between
independent circuits.
Environment: IEC 61010-1: 1990/A2: 1995 Compliance is demonstrated
Pollution degree 2 by reference to generic safety
EN 61010-1: 1993/A2: 1995 standards.
Pollution degree 2
Product safety: 73/23/EEC Compliance with the
European Commission Low
Voltage Directive.
EN 61010-1: 1993/A2: 1995 Compliance is demonstrated
EN 60950: 1992/A11: 1997 by reference to generic safety
standards.
To Next Page
Loading...