SERVICE MANUAL R5888B
QUADRAMHO Chapter 5
Addendum 2
Page 1 of 13
STATIC DISTANCE PROTECTION TYPE SHPM
Station __________________________ Date ____________________________
Circuit __________________________ Engineer ________________________
Panel ___________________________ Contract_________________________
Scheme option ___________________ Drawings ________________________
TEST RESULTS
PRELIMINARY CHECKS (Tick boxes if correct)
Wiring check
Insulation test
Relay and module data check
DC supply check
Power up
Relay inoperative alarm contact check
Self-check
VOLTAGE LEVEL DETECTORS (Test Option 43)
Level Terminals LED Pick-up Drop-off Reset
detector injected indication volts volts ratio (%)
A phase 1Z 1 – 4 A
B phase 1Z 2 – 4 B
C phase 1Z 3 – 4 C
If actual measurements are not taken just tick to show that pick-up has occurred at
49 volts and not at 40 volts.
To Next Page
Loading...