What does error E-11 mean on my Alto-Shaam AR-7T?
Error E-11 indicates that the N6 cavity sensor is open-circuit. This can be due to an error at the sensor input, the wrong RTD type (100? vs. 1000?), wiring issues, or a faulty board at the sensor input. Check the wiring and ensure the correct RTD type is used.
What does error E-10 mean on my Alto-Shaam AR-7T?
Error E-10 indicates that the N6 cavity sensor is short-circuit. This may be due to an error at the sensor input, the wrong RTD type (100? vs. 1000?), wiring issues, or a bad board at the sensor input. Check the wiring and ensure the correct RTD type is used.
What does error E-70 mean on my Alto-Shaam AR-7T Oven?
Error E-70 means the personality wiring is incorrect, and does not equate to a supported configuration. This can be caused by incorrect personality wiring, a broken wire, board issues reading personality jumpers, or old software with a new configuration.
General| Brand | Alto-Shaam |
|---|---|
| Model | AR-7T |
| Category | Oven |
| Language | English |
Explanation of danger, warning, caution, and notice labels.
Guidelines for safe operation and handling of the appliance.
Guidelines for maintenance and repair personnel.
Step-by-step guide for the liquid cleaning cycle.
Step-by-step guide for the tablet cleaning cycle.
List of error codes, descriptions, and potential causes.
Diagnostic steps for power-related issues.
Troubleshooting guide for heating element problems.
Steps to diagnose and fix spit motor failures.
Steps to diagnose and fix convection fan motor failures.
Steps to diagnose and fix wash pump failures.
Steps to diagnose and fix drain pump failures.
Steps to diagnose and fix grease pump failures.
Steps to diagnose and fix liquid cleaner pump failures.
Troubleshooting for water heater heating issues.
To Next Page
