MAINTENANCE
Vector™ H Serie s ▪ S ervice M an ual ▪ MN-4 6 543 ▪ R ev 01 ▪ 11/ 1 9
60
Continued from previous page
Monthly cleaning
procedure
To clean the oven monthly, do the following.
Step Action
1. Set the main disconnect switch to the OFF position.
Make sure the oven is cool—chambers are less than 140°F (60°C).
2. Remove the cooking racks a and jet plates b.
3. Separate the jet plates. Flexing the jet plates outward can aid in separating
the jet plates.
4. Spray the jet plates with EcoLab Greaselift™ or Chemco Dirt Buster III™ c
oven cleaner. Let the cleaner work for 3–5 minutes. Follow safety instructions
on cleaner bottle.
5. Scrub the jet plates with a non-abrasive nylon scrub pad. Rinse the jet plates
with water.
6. Spray a towel with EcoLab Greaselift™ or Chemco Dirt Buster III™ then wipe
the inside of the oven. Remove any residue with a water-soaked towel.
7. Clean the door glass d with Windex® or equivalent glass cleaner.
Continued on next page
CAUTION: Personal injury hazard.
Use hand protection when handling the jet plates.
To Next Page
Loading...
Need help?
General
