MAINTENANCE
Ve ct or™ H Se ries ▪ S ervice Ma nual ▪ MN -4 6 54 3 ▪ R ev 01 ▪ 11/ 19
61
Continued from previous page
8. Re-install the jet plates and cooking racks.
Cleaning the filters
(if equipped)
9. Remove the filters e.
10. Spray the filters with a mild cleaner and rinse with hot water.
11. Re-install the filters.
12. Set the main disconnect switch to the ON position when complete.
Result The oven is now clean.
NOTE: Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing towards
the food.
NOTE: Replace the filters at least once a year.
To Next Page
Loading...
Need help?
General
