38
4.2.8 Updating Firmware
When a new firmware is available, an "Update to..." command will appear below the “Firmware
Version” bar. Tap on the blue icon to upgrade the firmware. The sensor might need to reboot several
times during the upgrading. Please refer to Sec. 4.1.3 for details.
4.2.9 Restart
Tapping “Restart” in the sensor page will restart or reboot the activity sensor. If the sensor is not
connected to any WiFi network, but is within Bluetooth range of the user’s phone, the Restart command
can still work.
4.2.10 Change Room
To move an activity sensor to another room, user can tap the “Change Room” command. In the next
page, select the desired new room in the list of rooms, and then tap Save. The sensor will be moved to
the new room, as shown below.
To Next Page
Loading...