Amano OPUS-7000 Series - Setting System Parameters; Default All, Restore All, and Backup All; Common and Specific Parameters

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 19
OPUS-7000 Distributor’s Manual
3.1 Setting System Parameters
S
ystem parameters are numbered values representing various Paystation
settings. Each parameter number is assigned a function and a value. For
example, if the first octet of the host IP address (commonly 192) needed to be
changed, the parameter number of the first octet is entered, and a new value is
inserted. In this example, the parameter number is 43-0007 (representing the first
IP octet function) and the default value is 192 (representing the value of the first
octet number: 192.xxx.xxx.xxx). A description is displayed at the bottom of the
Parameter Setting menu when a parameter number button is pressed.
N
avigate to the System Parameters menu by opening the Engineer Operation
menu and pressing System Parameter. The menus contained within System
Parameter include Common Parameter, Specific Parameter, Print All, Default All,
Restore All, Backup All, and Difference Parameter.
C
ommon Parameters are categorized as common parts/functions applicable to a
common garage. For example, lot number, iParc server IP address, and use
credit card are parameters found in the Common section as they apply to rules
set by the facility. Specific Parameters are categorized as specific parts/functions
only applicable to the device. For example, machine number, device IP address,
and pay on entry are parameters found in the Specific section as they apply
specifically to the device. Please refer to the parameter guides for the common
parameter and specific parameter functions.
3.
1.1 Default All, Restore All, and Backup All
T
he Default All, Restore All, and Backup All buttons can change all parameters
back to their default values, restore all parameters from a CSV file, and backup
all parameters to a CSV file. Once a menu button is pressed, a pop-up displays
verifying the process is ready to be started. Press Start if ready or press Stop if
cancellation is necessary.
If
Backup All is selected, the parameters are backed up to the SD card in
SD\DataBackup\SettingsCSV.
3.
1.2 Common and Specific Parameters
N
avigate to the System Parameter menu to adjust both common and specific
parameters. Press either Common Parameter or Specific Parameter to enter
the Common/Specific Parameter menus. The sub-menus contained within both
parameter menus are Setting, Default, and Import CSV.
S
etting allows the alteration of each individual parameter. Press Setting to
change a parameter. The Setting menu displays the parameter number, the
setting the parameter is referring to, the value of the setting, the navigation
buttons, and the on-screen keypad.
I
f the parameter desired is not near the first set of parameters, skip to the
parameter by pressing the Read button. Once Read is pressed, enter the