Amano OPUS-7000 Series - Testing Paystation Functions; Adjusting Voice Tables

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 22
OPUS-7000 Distributor’s Manual
Reset the current count by pressing the Clear button. To reset all counts, press
the All Clear button. Use the Print button to print a report of all function counts.
The report is printed via the receipt printer.
P
ress Return to close the Function Count menu.
3.4 Testing Paystation Functions
Ma
ny Paystation functions can be tested via the Function Check menu. Possible
Paystation function checks include:
T
icket Reader: Test the REPM and view the REPM firmware version.
Receipt Printer: Test the print receipt function
Coin Insert: Test the coin insert mechanism
Note Insert: Test the bank note acceptor
Coin Dispenser: Test the coin dispenser
Note Dispenser: Test the BNR note dispenser.
LED: Test ticket inlet and coin inlet LED light strips
Shutter: Test ticket reader and coin inlet shutters
Switch: Display the status of all alarm switches in the Paystation
Keypad: Test keypad functionality.
Display: Test display colors and pattern
Touch Panel: Adjust the touch panel and test the touch panel
Voice Announcement: Adjust the voice announcement volume, test the
voice announcement, and adjust the door alarm volume.
iCore Board: Test RAM and EEPROM
N
avigate to the Function Check menu by entering the Engineer Operation menu
and pressing Function Check.
3.5 Adjusting Voice Tables
T
he voices in the 7000 Paystation may be altered as needed to tailor the
Paystation to the facility’s needs. Facilities may remove and/or change voices if
necessary.
T
o navigate to the Voice Setting menu, enter the Engineer Operation menu and
press the Voice Table Setting button followed by the Voice Setting button.
U
se the proper manuals to find which Registration number is desired to alter. The
Registration numbers define the process taking place. For example, registration
number 1 is the phrase played when a parker rolls onto the A/Entry loop (“Please
insert your parking ticket”).
T
o modify/change a phrase, press the Modify button in the lower-left corner of
the display. The menu and buttons are changed and the current entered value is
underlined, designating the number is in editing mode. Enter a new
number/phrase using the keypad. Press E when finished altering the phrase.