Amano OPUS-7000 Series - Show the Information Encoded on a Ticket

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 9
OPUS-7000 Distributor’s Manual
K
eypad:
Use the Keypad to enter the new value. Press the red C to clear the value and
press the green E to accept the new value.
O
nce all the correct values are inserted, press the Set button in the lower-left
corner of the display. After Set has been pressed, press OK to completely make
the change. Press Return when finished. Verify the settings have been changed
to the desired values by viewing the top of the First Time Operation menu. The
date and time are now the values set in the Clock Adjustment menu. Also verify
the date/time is correct in Kiosk mode by returning the Paystation back to idle.
Please see section 1.1 for instructions on returning to Kiosk/Idle mode.
N
ote: Amano McGann recommends the use of an NTP server on the
iParcProfessional hosted machine, or the use of the IO100 time. Use
Common Parameter 01-0021 to adjust the Time Sync Communication
setting.
Note: If the IO100 time is used, the Clock Adjustment time is reset to
the current IO100 time. Please use the IO100 webpage to adjust the
current date/time of the device when using the IO100 time sync.
1.4 Show the Information Encoded on a Ticket
I
t is often helpful to know the information encoded on a ticket when first
configuring the Paystation and troubleshooting ticket/encoding issues. Find the
information encoded on a ticket by opening the Paystation door and toggling the
Management Switch. Press Ticket Information after the Frist Time Operation
menu has loaded.
T
he Ticket Information menu enables the REPM to accept tickets. Insert a ticket
into the ticket slot. The information encoded on the ticket is shown on the
Paystation display. The ticket is spit out of the ticket slot after the ticket is read.
The information shown for the ticket includes ticket type, site code, lot number,
machine number, fee rate, ticket number, and issued date/time.
[Fig. 1.4A] Information encoded on the ticket inserted into the Paystation
Press the Return button when finished reading tickets.