© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 29
OPUS-7000 Distributor’s Manual
4.5 Adjusting Voice Announcement Volume
Change the volume of the voice announcement by navigating to the Operator
Operation menu and selecting Volume Adjustment. Raise the volume with the
High button and lower the volume with the Low button. Press Default to return
the volume back to default. Press Test to test the selected volume of the voice
announcement.
Once Return is pressed, the current voice adjustment volume is saved and used.
[Fig. 4.5A] Press To Volume 2 to switch to the secondary Paystation volume
4.6 Checking the Contents of the Coin and Note Safe
To check the contents of the coin/note safes, navigate to the Operator
Operations menu and select Safe Check/Safe Sub Total. The denominations of
each coin/note are displayed along with their corresponding counts. To switch
the medium of pay, press To Note Safe Display/To Coin Safe Display. Print out
a report of the current coin/note safe totals by pressing Note Safe Sub
Total/Coin Safe Sub Total. It is possible to print out the previous totals by
pressing the bottom-most button labeled Coin Safe Previous Total or Note Safe
Previous Total.
To Next Page
Loading...
