Amano OPUS-7000 Series - Checking Store Validation Amounts; Tax Reports; Dip Switch Boot Modes

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 30
OPUS-7000 Distributor’s Manual
4.7 Checking Store Validation Amounts
The Store Discount Total report shows all existing store validations and the
percentage discount/surcharge each validation give. Print out a Store Discount
Report by entering the Operator Operations menu and pressing the Store
Discount Total button. The report is printed via the receipt printer. If cancellation
of the printing is necessary, press the Stop button at any time.
4.8 Tax Reports
The Tax Report shows the amount of total table amounts for each tax. The Tax
Report shows the tax number, total taxable amount for the tax number, and the
total tax collected for the tax number. A total of all the “Total Tax Collected”
amounts is shown at the end of the receipt.
To print out a Tax Report, navigate to the Operator Operations menu, and press
Tax Report. The report is printed via the receipt printer.
DIP SWITCH BOOT MODES
The OPUS-7000 contains a bank of dip switches on the iCore board responsible
for determining the boot mode and/or logging. Please use the image below to
select the proper dip switch settings.
Initialization No Initialization