Amano OPUS-7000 Series - Backing up and Restoring Paystation Settings

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 24
OPUS-7000 Distributor’s Manual
Sub Total: Prints the sub-total report
Auto-Inventory: Automatically takes the inventory of the Paystation.
Select the type of card desired to create and press OK and Return. Press the
Start button and insert a blank ticket into the Paystation. Insert tickets as desired
and press Stop when finished.
[Fig. 3.6A] Adjust the operator number to create unique Management cards
3.7 Backing Up and Restoring Paystation Settings
O
nce the Paystation configuration is complete and the Paystation is fully
functional, it is recommended to make a backup of the working Paystation
configuration settings.
N
avigate to the Backup/Restore menu by entering the Engineer Operation menu
and selecting Backup/Restore. Press Backup to backup the RAM to the SD
card. Press Restore to restore the backup from the SD card.
T
he Backup and Restore menus allow for the backup/restore of specific
Paystation configurations or All Data if necessary.