Amano OPUS-7000 Series - Return the Paystation Back to Idle

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 6
OPUS-7000 Distributor’s Manual
[Fig. 1.0B] First Time Operation Menu
1.1 Return the Paystation Back to Idle
T
o return the Paystation to its idle mode after all desired configurations have
been made, navigate to the root menu of the current function (First Time
Operation, Operator Operation, Manager Operation, Engineer Operation).
O
nce in the root menu, verify the display is on the second page by looking at the
page number displayed at the top of the menu. Switch to the second page by
pressing the next button in the lower-right corner of the screen, if necessary.
[Fig. 1.1A] The page number is displayed on the top of the root menu