Amano OPUS-7000 Series - Adjust the Date and Time; Changing Paystation Settings

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 8
OPUS-7000 Distributor’s Manual
1.3 Adjust the Date and Time
T
he Clock Adjustment menu contains settings necessary to configure the current
date and time of the Paystation. Enter the Clock Adjustment menu by opening
the Paystation door and toggling the Management Switch. Press Clock
Adjustment once the First Time Operation menu has loaded.
E
nter the Management password (C1441104) when prompted and press E to
confirm. The following section will describe how to change Paystation settings
using the Clock Adjustment menu as an example.
1.
3.1 Changing Paystation Settings
[Fig. 1.3A] Use the value types, values, and keypad to adjust the date and time
V
alue Types:
Press any of the value type buttons to enter edit mode. Once the button becomes
highlighted blue, enter the new value using the on-screen keypad.
V
alues:
The current values of each value type. The example above shows the year is
2014, the month is 7 (July), the date is the 11
th
, and the time is 10:29 (24-hour).