© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 25
OPUS-7000 Distributor’s Manual
3.8 Sequence Number Check
E
ach process in the Paystation has a sequence number. To check the sequence
number of each process, navigate to the Engineer Operation menu and press
Sequence Number Check. The sequence along with the corresponding
sequence number is displayed.
3.9 Device Counter
T
he Device Counter menu contains counts for each device in the OPUS-7000
Paystation. Navigate to the Device Counter menu by entering the Engineer
Operation menu and pressing Device Counter.
[Fig. 3.9A] Each device in the Paystation has counts for each device function
U
se the Previous and Next buttons to navigate through the device counts. To
alter a count, press the gray button associated with the device count and use the
on-screen keypad to adjust the value. Press E to accept the change. To clear a
count, press the gray button associated with the desired device count and press
Clear. Press All Clear to clear all counts in the Paystation.
P
ress Return to return to the Engineer Operation menu.
To Next Page
Loading...
