Amano OPUS-7000 Series - First Time Operation Menu

© Copyright 2014 Amano McGann, Inc. OPUS7000_Distributor_10062014 5
OPUS-7000 Distributor’s Manual
FIRST TIME OPERATION MENU
T
he First Time Operation menu contains basic configuration settings for the
OPUS-7000 Paystation. The Operation menus contained within the First Time
Operation menu are Operator Operation and Manager Operation.
P
ower the Paystation ON and wait for the Device to display the idle screen. Once
idle, open the Paystation door and toggle the Management Switch located in
front of the iCore board. Once the switch is toggled, the First Time Operation
menu is displayed.
[Fig. 1.0A] The Management Switch
T
he First Time Operation menu displays the date, day, and time at the top of the
menu. The middle of the menu displays the statuses of LC1 (arming loop) and
LC2 (closing loop). The application version of the Paystation is shown below the
arming/closing loop statuses.
T
he configurable settings within the First Time Operation menu are
Error/Warning, Clock Adjustment, Ticket Information, and Cash Check.
N
ote: Any button in pink designates the Management password
(C1441104) is required to enter the menu.
E
ach of the First Time Operation Menu sections begins from the Paystation in an
idle state.