Amazone EasySet 2 - Page 11

Preparing the EasySet2
EasySet 2
BAG0217.9 06.22
11
Determining the fertiliser calibration factor with the lateral calibration device
See also operating manual for the implement.
1. Perform a spread rate check with the lateral
calibration device.
2. Enter the collected quantity of fertiliser and
the required time in the calculation formula
and calculate the calibration factor.
Enter the calibration factor:
3. Select calibration.
→ The calibration factor will be displayed.
4. , Set the calibration factor.
5.
Save the value and go back to the
work display.
Formula to calculate the calibration factor:
ZA-M:
Calibration factor =
2.2 x
Collected fertiliser quantity [kg]
Time [s]
ZA-V:
Calibration factor =
0.65 x
Collected fertiliser quantity [kg]
Time [s]
ZA-X:
Calibration factor =
1,89 x
Collected fertiliser quantity [kg]
Time [s]