General Safety Instructions
GreenDrill BAH0054-4 02.13
13
1.13 Warning symbols and other signs on the machine
Always keep all the warning symbols of the machine clean and in a
legible state. Replace illegible warning symbols. You can obtain the
warning symbols from your dealer using the order number (e.g. MD
075).
Warning symbols - structure
Warning symbols mark hazardous areas on the machine and warn against residual dangers. At these
points, there are permanent or unexpected dangers.
The warning sign consists of 2 fields:
Field 1
is a symbol describing the danger, surrounded by a triangular safety symbol.
Field 2
is a symbol showing how to avoid the danger.
Warning symbols - explanation
The column Order number and explanation provides an explanation of the neighbouring warning
symbol. The description of the warning symbols is always the same and specifies, in the following
order:
1. A description of the danger.
For example: risk of cutting.
2. The consequence of non-observance of the risk-avoidance instructions.
For example: causes serious injuries to fingers or hands.
3. Instructions for avoiding the danger.
For example: only touch machine parts when they have come to a complete standstill.
To Next Page
Loading...