Amazone GreenDrill 200-E - Display; Main Menu Display

GreenDrill 5.2 on-board computer
42
GreenDrill BAH0054-4 02.13
7.4 Display
7.4.1 Main menu display
Main menu for operation without speed sensor
Display of set sowing shaft speed (SW in %).
Set the desired sowing shaft speed using
the
buttons.
Set the tractor speed [km/h] in the Calibration
test menu or the Area calculation menu.
Main menu for operation without speed sensor
Sowing shaft speed (in %)
Set value 50%
Actual value 25 %
Tractor speed [km/h]
Set value 20 km/h
Actual value 10 km/h
Display SET value ACTUAL value
Sowing shaft speed (in %) The set speed of the sowing
shaft (in %).
The actual speed of the sowing
shaft (in %) is calculated according to
the tractor speed and is shown in the
display (sensor required).
Tractor speed [km/h] The set tractor speed in the
Calibration test menu or in
the Area calculation menu.
The actual tractor speed [km/h] is
measured with the aid of the sensor
and shown in the display.