Amazone GreenDrill 200-E - Radar; Lifting Gear Sensor; Warning Buzzer

GreenDrill 5.2 on-board computer
60
GreenDrill BAH0054-4 02.13
7.8.5 Radar
The on-board computer works with or without radar:
YES, NO or AUTO
Make settings with the
buttons.
7.8.6 Lifting gear sensor
The on-board computer works with or without lifting gear sensor:
YES, NO or AUTO
Make settings with the
buttons.
During work, the lifting gear signal of the tractor works in sensor
position.
HI or LO
Setting with the button
Change the settings if the GreenDrill seeds in the wrong position of
the lifting gear sensor.
7.8.7 Warning buzzer
Set whether the warning buzzer (e.g. for fault messages) should be
switched on or off during work:
EIN (on)
AUS (off)
Make settings with the buttons.