Use of the machine
GreenDrill BAH0054-4 02.13
31
5.1 Filling the hopper
Before climbing onto the loading board
Switch off the on-board computer
Switch off the tractor's universal joint shaft, apply the parking brake, shut down the tractor engine
and remove the ignition key
Wait until the tines of the rotary harrow (rotary cultivator) have come to a standstill.
The hopper cover has a threaded seal.
Open the hopper cover and slowly fill the hopper.
Do not exceed the nominal volume.
Screw on the hopper cover so that the hopper is
air-tight.
To Next Page
Loading...