Amazone GreenDrill 200-E - Emptying the Hopper; Working Hour Meter; Set the Language

To Next Page

To Previous Page

GreenDrill 5.2 on-board computer

GreenDrill BAH0054-4 02.13

7.5.5 Emptying the hopper

1. Prepare the machine for emptying the hopper (see above).

2. Call up the menu.

3. Press the

button.

The sowing shaft motor turns at maximum speed

(without blower fan).

The process can be terminated at any time by pressing the

button or button.

The display then returns to the main menu.

7.5.6 Working hour meter

The working hour meter measures the run time of the sowing shaft.

Pressing the

button for 5 seconds sets the part time to zero.

7.5.7 Set the language

1. Call up the menu.

2. Press the

button.

3. Select the required language using the cursor buttons.

4. Confirm the selection with the

button.