Amazone GreenDrill 200-E - Field Use - Starting Work

GreenDrill 3.2 on-board computer
36
GreenDrill BAH0054-4 02.13
6.7 Field use - starting work
Do not switch off the blower fan during use.
Before starting work
1. Close the hopper cover.
2. Check that the baffle plates are evenly distributed
3. Check that the seed delivery hoses drop downwards along the entire length.
Starting work
1. Start the tractor.
2. Press the
button
switch the machine on.
3. Press the
button.
the fan blower rotates
the red LED flashes
the red LED lights up as soon as the blower fan motor reaches the operating speed.
4. Press the
button.
the sowing shaft rotates
the green LED flashes
5. Press the
button as soon as the sowing shaft motor reaches the nominal speed
the green LED flashes
the seed is dosed.