Amazone GreenDrill 200-E - Page 53

GreenDrill 5.2 on-board computer
GreenDrill BAH0054-4 02.13
53
Fault message Fault description Fault elimination
Display when there is uncon-
nected or faulty cabling.
Check the cables and plugs.
If the motor is connected and
not overloaded, but still does
not rotate.
Contact the Service Depart-
ment.
If the motor is connected and
not overloaded, but still does
not rotate.
Contact the Service Depart-
ment.
The speed sensor does not
send a signal.
Check the cables and plugs.