Ambient Weather WS-5000 User Manual

Version 1.10 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 14
1. Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as shown in Figure
17 .
Figure 17
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter.
3. Channel Number: The WS-5000 supports up to eight transmitters. To set each channel number (the default is
Channel 1), change Dip Switches 1, 2 and 3, as referenced in Figure 18.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F vs. °C), change Dip
Switch 4, as referenced in Figure 18.
Switch in down position. Switch in up position.
Figure 18

Ambient Weather WS-5000 Specifications

General

Wireless Frequency	915 MHz
Wind Speed Accuracy	± 1 mph
UV Index Range	0 to 16
Light Range	0 to 200, 000 Lux
Solar Radiation Range	0 to 1800 W/m²
Connectivity	Wi-Fi
Display Type	TFT LCD
Transmission Distance	1000 feet
Temperature Range	-40 to 140 °F
Humidity Range	10% to 99%
Wind Direction	0° to 360°
Rainfall Measurement	0 to 999.9 inches
Power Source (Outdoor Sensor)	Solar panel with battery backup
Console Power Source	5V DC adapter
Data Storage	Ambient Weather Network
Compatibility	Amazon Alexa, Google Assistant, IFTTT