AMD 770 User Manual

36
Advanced ACPI Configuration
Use this section to configure additional ACPI options.
Power Management/APM
Use this item to enable or disable AMI based power management and APM support.
Suspend Time Out
If it is set Enabled and no activity during this time period, the BIOS will place the system into
suspend low power state. The optional settings are: Enable; 1~64 minutes.
Power Button Mode
The optional settings are: On/Off; Suspend.
Video Power Down Mode
The optional settings are: Disabled; Standby and Suspend.
Restore on AC Power Loss
The optional settings are: Disabled; Power on; Power Off and last state.
3-9 Miscellaneous Control
XBLUE- 77A3
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Miscellaneous Control
Advanced PCI/PnP Setting
Help Item
WARNING: Setting wrong values in below sections
may cause system to malfunction
Clear NVRAM No
Plug &Play O/S No
PCI Latency Timer 64
Allocate IRQ to PCI VGA Yes
Palette Snooping Disabled
PCI IDE Bus Master Disabled
Offboard PCI/ISA IDE Card Auto
IRQ Resources Press Enter
Options
Clear NVRAM during System Boot
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Discard Changes F6:Standard Settings F7: Optimized Settings
XBLUE- 78GA3/ XBLUE- 78VA3
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Miscellaneous Control
Advanced PCI/PnP Setting
Help Item
WARNING: Setting wrong values in below sections
may cause system to malfunction
Clear NVRAM No
Plug &Play O/S No
PCI Latency Timer 64
Allocate IRQ to PCI VGA Yes
Palette Snooping Disabled
PCI IDE Bus Master Enabled
IRQ Resources Press Enter
Options
Clear NVRAM during System Boot
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

AMD 770 Specifications

General

Brand	AMD
Model	770
Category	Motherboard
Language	English