American Dynamics Intellex Intellex DVMS Installation And Configuration Guide

Configuring the Intellex
Installation and Configuration Guide 35
5 Select Quality.
6 Select the sensitivity and resolution. Higher sensitivity and resolution offer better quality but
less recording time.
7 Click the Data Lifetime tab to configure the deletion of expired data.
8 Select a Data Lifetime Mode:
• Disabled prevents any scheduled deletion of video data (default).
• Select Cameras specify individual cameras. Click Setup to display available cameras and
their data lifetime, then select individual cameras and data durations.
• All Cameras to specify the data duration for all cameras.
9 Click OK.
Setting Up Camera Rate
1 From the Setup Options screen, click Rate.
2 Select a rate mode:
• Use Auto Rate Mode evenly distributes ips rate across active cameras; go to step 3 to set up
Auto Rate Mode.
• Use Camera Selectable Rate Mode sets the rate of each camera; go to step 4 to set up
Camera Selectable Rate.
3 Set up Auto Rate Mode:
a Click Use Auto Rate Mode.
b In Regular or Custom Schedule Mode, choose a Normal Rate. Normal Rate is unavailable
in Single Camera Schedule Mode.
c In Regular, Custom Schedule, or Single Camera Mode, choose an Alarm Rate.
d In Single Camera Schedule mode, choose a single camera rate.
e Click OK.
Super highest image quality
Normal mid-range quality
Extended Record highest compression

American Dynamics Intellex Intellex DVMS Specifications

General

Brand	American Dynamics
Model	Intellex Intellex DVMS
Category	DVR
Language	English